Drum Mic Routing from VST (Ezdrummer)

Music Production Forums General Section Drum Mic Routing from VST (Ezdrummer)

Tagged: ,

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #17332

    Im struggling to get individual mics routed into my timeline from Ezdrummer 2

    In the VST I set unique output channels, then in the DAW Create new Audio layers which point to those internal layers as their inputs. I can hear the pieces while monitoring each channel, but when bouncing audio the drums dont come through to the final mix other than the master channel which only seems to pick up output channel 1 from the VST

    I tried getting around this by creating a return and sending each drum kit piece to that but still no luck

    In Reaper, as soon as you add a VST like this, it automatically asks you if you want it to create the routing and layers for all output and it works right away – so I’ve never needed to set it up on my own and I’m sure I’m missing something.

    hopefully ive described this well enough! any help would be appreciated



    We have replicated your issue. In order to solve it please record the extra outputs as audio files.

    All of the extra audio channels that serve as extra outputs for easy drummer should be with monitoring on and recording arm on. Record / print the entire length of the project. You will now have all of the channels in EZ Drummer as audio and after that you can export the final mix normally.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.