This is the featured image of the Add Depth to Your Instruments Using a Delay Effect blog article.

Add Depth to Your Instruments Using a Delay Effect

Last Edited: Dec 21, 2023

A delay is a powerful tool you can use to give your instruments and recordings more depth and dimension. A repeating delayed signal after the initial sound from your recording creates a sense of space and movement. The following tutorial will show you how to add depth to your instruments using a delay effect.

As usual, we'll begin by listening to the short sequence created in our SoundBridge: DAW, which contains most of the whole mix's elements, including a few instrument tracks like an el. Piano and trumpet.

This is a screenshot of our mix taken before applying any processing to the instrument tracks.

~Full Mix - Instruments (Unprocessed)

Let's Get Started!

As we can hear, the instruments sound pretty dry. We made them this way to allow us to add depth to our instruments using a delay effect. Let us start with the el—piano sound.

This is a screenshot of our el. piano audio channel.

~El. Piano - Solo (Unprocessed)

Within our SoundBridge: DAW, we will add a new instance of the delay effect to the el. Piano channel. In this case, we used Timeless 3 by FabFilter, but you can use any other delay effect plugin you like. This effect has a lot of options, as you can see and hear in the image and audio example below. In our case, we have set the delay time to 1/8 none, increased the feedback time and blurred the delay signal slightly by increasing the lo-fi and diffuse parameters in the interface's center. This particular setting worked well for this el. Piano sequence, but remember that it might not be suitable for other instruments, so feel free to experiment. To emphasize the delay signal, apply a multiband compressor effect right after the delay effect, as we did.

This is a screenshot of our mix with the delay and compressor interface used to add depth to our el. piano instrument

~El. Piano - Solo (Processed With Delay & Compressor)

Add Depth to Other Instruments Using Similar Delay Settings

Moving forward, we'll repeat the process for the trumpet channels, but this time, we'll avoid processing it with additional lo-fi, diffuse, or compressor because it sounds better without them. Let us hear it.

This is a screenshot of our mix the delay and compressor interface applied to the trumpets.

~Trumpet - Solo (Unprocessed)

~Trumpet - Solo (Processed With Delay)

Finally, let us hear the whole mix with processed instruments.

~Full Mix - Instruments (Processed With Delay)

If you liked this article on audio processing, here are some more on the same subject:

Education

MASTER MUSIC PRODUCTION

Expert-led courses designed to take you from fundamentals to finished tracks.

An image of the House Boot Camp album art.

HOUSEFrom bouncy bass and solid kicks, this course teaches you the most modern House music production techniques needed to succeed and stand out.

An image of the Trap Boot Camp album art.

TRAPQuit sounding like generic Trap and produce something World with hints of the Far East. Create ethnic soundscapes to put your Trap ahead of the curve.

An image of the Ambient Boot Camp album art.

AMBIENTProduce relaxing, sophisticated psy-influenced ambient. Psychedelic and relaxing to listen to, create meditative soundscapes to put your listeners in Zen.