This is the featured image of the Creating a Vibrato-Rise Patch Using BEAP (MAX) blog article.

Creating a Vibrato-Rise Patch Using BEAP (MAX)

Last Edited: Nov 13, 2023

This article will provide a step-by-step tutorial to create a vibrato-rise patch using BEAP. This means that this is not going to be a standard vibrato patch. The rise in pitch will lead to a faster vibrato.  

What Is Vibrato?

Vibrato is a rapid but slight variation in pitch while holding a not-for-longer duration. It can be produced using an instrument, voice, or both.   Here is a step-by-step tutorial on how to create a Vibrato rise patch using BEAP:

STEP 1: Pull out the following modules from BEAP and alter their settings as shown.

There will be a small 'b' symbol on the left side of the screen, which you can click to search for the following modules:  

  • Oscillator
      
  • Choose the 'sine' wave.
  • Set CV2 to 10.2 %
  • Offset to 9.47 %
  • Keyboard

    No change in settings.  
  • ADSR
      
  • Attacks: 50 ms
  • Decay: 50ms
  • Sustain: 70%
  • Release: 500ms
  • VCA (Voltage Controlled Amplifier)

    No change in settings.  
  • Stereo

    No change in settings.  
  • CV LFO (Low Frequency Oscillator)
  • Phase: 0.00
  • Rate: 6.44Hz
  • CV Amount: 100 %

Importance of the 'CV LFO'

As the name suggests, this is a low-frequency oscillator with a CV input. This provides the vibrato to the sound by going into the CV2 input of the Oscillator. The 1v/oct output of the keyboard goes into the CV input of the LFO, hence controlling the intensity of vibrato via the pitch change.    

STEP 2: Patch all the modules according to the following instructions, referring to the picture below 

  • Put the 1v/oct out of the keyboard into the CV1 input of the Oscillator.
  • Put the 1v/oct out of the keyboard into the CV input of the CV LFO.
  • The gate out of the keyboard goes into the ADSR Gate.
  • The signal out of the CV LFO goes into the CV2 input of the Oscillator.
  • The oscillator signal goes into the signal in of VCA.
  • The signal out of ADSR goes into CV in of VCA.
  • The VCA output goes into the stereo's left and right inputs.

The patch is ready; as soon as you press the keys on the keyboard, the vibrato starts; the higher the pitch, the more intense the vibrato becomes.

Éducation

MAÎTRISEZ LA PROD

Des cours d’experts pour passer des bases aux titres finis.

Une image de la pochette House Boot Camp.

HOUSEDu bass bouncy aux kicks solides, ce cours enseigne les techniques House modernes pour réussir et se démarquer.

Une image de la pochette Trap Boot Camp.

TRAPArrêtez de sonner Trap générique et faites une prod World avec des touches d’Extrême-Orient. Créez des ambiances ethniques pour mettre votre Trap en avant.

Une image de la pochette Ambient Boot Camp.

AMBIENTProduisez de l’ambient relax, sophistiqué, à influence psy. Psyché et relax à écouter, créez des soundscapes méditatifs pour mettre vos auditeurs en Zen.