This is the featured image of the An Alternative Way to Tune Your Hi-Hats blog article.

An Alternative Way to Tune Your Hi-Hats

Last Edited: Nov 30, 2023

Proper tuning is fundamental to getting a good drum tone. As with any instrument, it can take years to develop an ear for what a properly tuned bass, tom, or snare drum should sound like. Tuning your drums is essential, just like tuning your guitar before you record any serious material with it.

It's important to understand that drum tuning should be a routine for the sake of musicality in your songs. Today, there are several options you can use to tune the electronic drum samples. This is why we decided to show you a not-so-common technique that will allow your hi-hats to sound and sit better in the mix.  

Tune Your Hi-Hats!

As usual, we have previously made a project in the SoundBridge: DAW. As you can see, this project contains essential elements of the whole mix of kind of Progressive House beats. Let's hear it.  

~Full Mix - Without Hi-Hat

The next step would be to choose an appropriate hi-hat loop, which would make our overall drum section sound richer. Let's hear how it sounds solo and then in context with everything else in the mix.

~Hi Hat - Unprocessed

~Full Mix - Hi-Hat Unprocessed  

Frequency Shifter Processing

The tool e have chosen to tune our hi-hat loop is e Frequency Shifter effect. Frequency Shifter is a device that raises or lowers the frequency of an input signal. It does this using a complex amplitude modulation-like technique. Unlike the pitch shifter, the frequency shifter does not preserve the harmonic relationships between the various tones and harmonics in the input signal. Because of this, sounds processed by a frequency shifter start sounding unnatural with only a small amount of shift. However, unlike the pitch shifter, it is feasible to implement a frequency shifter with all-analog circuitry. You can use frequency shifting to tune your drum sounds. If you use it in small amounts, the frequency shifting can make an excellent alternative to pitch shifting when tuning drums.  

MFreqShifter by Melda Productions

For the sake of this tutorial, we have selected a plugin called MFreqShifter, which was designed by Melda Productions. So, let us introduce you to its interface and functions.  

The Interface

As you can see, we have a pretty straightforward interface in front of us. The upper part of the interface contains control parameters on which we will concentrate on the task of Hi-Hat loop tuning. From left to right, we can see several parameters:

  • DRY/WET - controls the amount of the processed signal
  • SHIFT -  Defines the amount of each frequency shifting. The more you move each frequency, the more they lose the harmonic relationship and start sounding dirty and distorted.
  • WIDTH - Width controls the frequency shift between channels. It works as a multiplicative coefficient, which means that if S shifts the first channel, then the second channel is turned by S*Width. If you are using a multichannel setup, then the next channel will be S*Width*Width, etc. For example, if you set to shift to 100Hz and width to -100% in a stereo set up, then the left channel is shifted by +100Hz and right one by -100Hz. Any value other than 100% makes each channel shifted by a different amount, which can provide more sound width.
  • FEEDBACK - Feedback controls how much of the output signal is sent back with some delay. As a result, such a signal is shifted every time it is fed back. This results in sequences with a constantly changing spectrum.
  • DELAY - Delay determines the feedback delay. You can also use synchronization below to make the delay adjust dynamically to the song's tempo.

Audio Examples

After a brief description of the parameters mentioned above, we can move to a practical example. As you can see from the picture above, the processed signal is set all the way to the maximum, shift value at 1756 Hz, width around 100%, while feedback is increased up to 80% in order to induce a sense of space in the stereo field. Lastly, the delay is set to 10ms, and this is affecting the feedback amount. Let us hear how our Hi-Hat loop sounds now processed with MFreqShifter. First, we will listen to it solo and then in context with other elements in the mix.  

~Hi Hat - Processed With MFreqShifter

~Full Mix - Hi-Hat Processed With MFreqShifter

교육

음악 프로덕션 마스터

기초부터 완성 트랙까지 이끄는 전문가 코스.

House Boot Camp 앨범 아트 이미지.

HOUSE바운시 베이스와 탄탄한 킥부터, 이 코스는 성공하고 돋보이기 위한 가장 현대적인 House 프로덕션 테크닉을 가르칩니다.

Trap Boot Camp 앨범 아트 이미지.

TRAP뻔한 Trap처럼 들리지 마세요—극동의 힌트를 담은 월드한 사운드를 만드세요. 에스닉 사운드스케이프로 Trap을 한발 앞서게 합니다.

Ambient Boot Camp 앨범 아트 이미지.

AMBIENT편안하고 세련된 psy-영향 앰비언트를 제작하세요. 듣기에도 몽환적이고 편안한, 리스너를 Zen에 두는 명상적 사운드스케이프를 만드세요.